The main purpose of the programmer is to program microcontrollers containing FLASH memory. It can work with microcontrollers from ITE, ENE, NUVOTON, MEC, EXPLORE.
 
Additionally, the programmer allows you to check keyboards offline and from under the shell, as well as work with EEPROM on matrices (EDID) 30 and 40 pin not e_DP.
 
Additional modules CONN_MIX32, TETRIS, SPIDER, JAWS, EXPLORER module (expansion cards) are available for the programmer.
 
The programmer has three connectors on board with different pitch: 0.5 mm, 0.8 mm, 1 mm pin number up to and including 32. Allows you to connect almost any motherboard with ITE, ENE, NUVOTON microcontrollers and program them through the keyboard connector.
 
Scope of delivery:

1. Main module with connectors in increments of 0.8mm (34 pin), 1 mm (32 pin), 0.5mm (32 pin).

2. The main set of loops for 24/26/28/30/32 (1 mm pitch) + 3 loops (0.5mm 30 pin, 0.8mm 26 pin, 0.8mm 30 pin) for connecting the motherboard and the programmer
The programmer has three connectors on board with different pitch: 0.5 mm, 0.8 mm, 1 mm pin number up to and including 32. Allows you to connect almost any motherboard with ITE, ENE, NUVOTON microcontrollers and program them through the keyboard connector.
 
Scope of delivery:

1. Main module with connectors in increments of 0.8mm (34 pin), 1 mm (32 pin), 0.5mm (32 pin).

2. The main set of loops for 24/26/28/30/32 (1 mm pitch) + 3 loops (0.5mm 30 pin, 0.8mm 26 pin, 0.8mm 30 pin) for connecting the motherboard and the programmer